|
AMSOIL
Synthetic Lithium Complex Racing Grease |
|
|
NLGI
GC-LB
Requirement |
Series 2000 Racing Grease |
| Thickener |
NR* |
Lithium Complex |
| NLGI Consistency Grade |
NR* |
2 EP |
| NLGI Performance Grade |
NR* |
GC-LB |
| Penetration (ASTM D-217) 25° C [77° F], 0.1 mm Worked 60
strokes |
220 - 340 |
265 - 295 |
| Dropping Point (ASTM D-566) °C [77° F] |
220 [428] |
285 [545] |
| Water Washout (ASTM D-1264) 79° C [175° F] % loss |
15 max |
5.1 |
| Oil Separation (ASTM D-1742) 24 hr. @ 25° C [77° F], % loss |
10 max |
2.8 |
| Rust Protection (ASTM D-1743) |
pass |
pass |
| Timken OK Load Test (ASTM D-2509), lbs. |
NR* |
60 |
| Fortified with Moly Compound |
NR* |
no |
| Four Ball Wear Test (ASTM D-2266) Wear Scar Diameter, mm |
0.9 max |
0.32 |
| Compatibility with other greases |
NR* |
excellent |
| Extreme Pressure, Four Ball Method (ASTM D-2596) Weld Point,
kgf |
200 min |
400 |
| Extreme Pressure, Four Ball Method (ASTM D-2596) Load Wear
Index, kgf |
30 min |
65 |
| High Temperature Life (ASTM D-3527) hours |
80 min |
300 |
| Fretting Wear (ASTM D-4170)* mg |
10 max |
3.4 |
| Elastomer Compatibility (ASTM D-4289) Volume Change, %, GC |
-5 to +30 |
21.6 |
| Elastomer Compatibility (ASTM D-4289) Volume Change, %, LB |
0 to +30 |
9.88 |
| Elastomer Compatibility (ASTM D-4289) Hardness Change,
durometer-A points, GC |
+2 to -15 |
-3 |
| Elastomer Compatibility (ASTM D-4289) Hardness Change,
durometer-A points, LB |
0 to -10 |
-6 |
| Leakage (ASTM D-4290), G* |
10 max |
6.0 |
| Low Temperature Torque (ASTM D-4693) n·m, max @ -40° C
[-40° F] |
15.5 |
2.3 |
| Water Spray Off (ASTM D-4049), % max |
NR* |
22.7 |
| * NR: Not Required for NLGI GC or LB labeling |
© 2005 WorldLube.com. All Rights Reserved.
Site Maintained by
Summitt New
Media and hosted by
Summitt.net.
