|
AMSOIL
Synthetic Lithium Complex Water Resistant Grease
|
|
NLGI GC-LB
Requirements |
AMSOIL GWR |
| Thickener |
NR |
Lithium Complex |
| NLGI Consistency Grade |
NR |
1.5 |
| NLGI Performance Grade |
GC-LB |
GC-LB |
| Extreme Pressure Fortified |
NR |
Yes |
| Penetration (ASTM D-217) 25°C [77°F], 0.1 mm
Unworked
Worked 60 strokes |
220-340
220-340 |
295-310
295-310 |
| Dropping Point (ASTM D-2265) °C [°F] |
220[428] |
>260[>500] |
| Water Washout (ASTM D-1264) 79°C [175°F] %
loss |
15 max |
0.9 |
| Oil Separation (ASTM D-1742) 24 hr. @ 25°C
[77°F], % loss |
6 max |
2.4 |
| Rust Protection (ASTM D-1743) |
1 max |
pass |
| Timken OK Load Test (ASTM D-2509), lbs. |
NR |
45 |
| Four Ball Wear Test (ASTM D-2266) Wear Scar
Diameter, mm |
0.6 max |
0.56 |
| Compatibility with other greases |
NR |
excellent |
| Extreme Pressure, Four Ball Method (ASTM
D-2596)
Weld Point, kgf.
Load Wear Index, kgf. |
200 min
30 min |
315
40 |
| Meets Disc Brake Wheel Bearing Specification:
GM 4733-M
GM 6031-M
Chrysler MS-3701 |
NR
NR
NR |
Yes
Yes
Yes |
| High Temperature Life (ASTM D-3527) Hours |
80 min |
124 |
| Fretting Wear (ASTM D-4170)* Mg |
10 max |
9.7 |
| Elastomer Compatibility (ASTM D-4289)
Volume change, %, GC
Volume change, %, LB
Hardness change, durometer-A points, GC
Hardness change, durometer-A points, LB |
-5 to +30
0 to +30
+2 to -15
0 to -10 |
26.2
5.7
-3
-8
|
| Leakage (ASTM D-4290), g* |
10 max. |
1.0 |
| Low Temperature Torque (ASTM D-4693) n*m, max
@ -40°C [-40°F] |
15.5 |
8.2 |
| Water Spray Off (ASTM D-4049), % max |
NR |
6.9 |
| |
| NR: Not Required for NLGI
GC or LB labeling |
© 2005 WorldLube.com. All Rights Reserved.
Site Maintained by
Summitt New
Media and hosted by
Summitt.net.
